Spider enclosure

On November 1st I came across this small spider enclosure on a
purpose-bent stalk of little bluestem grass (Schizachyrium scoparium).
Three weeks later the enclosure looked about the same.

❂
❂      ❂
❂      ❂      ❂
❂      ❂
❂

Why don’t problems that are easily fixed get fixed?

So I was checking out at Whole Foods a couple of months ago. Because of the pandemic, many credit/debit card terminals have been upgraded so that now you can tap a card on the device instead of having to swipe the card or insert it. The problem is that a customer doesn’t know exactly where on the terminal to tap the electronic chip in the card. My first taps didn’t work, so I asked the checker-outer specifically where I needed to hold my card. She indicated a place a bit further back from where I’d tried. That worked.

I pointed out to her that the store could head off this problem by putting a little sticker with the words TAP HERE in the exact place under which the hidden sensor sits inside the terminal. She and the bagger seemed not to understand what I was saying, or else didn’t think it was important. I went on to explain that different stores use different kinds of terminals, and some of them are finicky about exactly where a card needs to be tapped. Employees who work the registers learn where that spot is, but customers can’t be expected to know, so a little sticker or some other symbol would show us the right place to tap. Eventually, one right after the other, the two clerks suddenly changed demeanor and said my suggestion was a good one and they’d pass it along to the management, but I got the distinct impression they were just saying that to get rid of me. If I go back to that Whole Foods a few months from now, I seriously doubt I’ll see a little sticker on each terminal showing where to tap a card.

Store bathrooms often present the same kind of problem in automated sinks, hand dryers, and paper towel dispensers: where exactly to put your hand(s) to make the device come on. I often have to move my hands around to various positions until the device finally activates—and sometimes no hand position ever manages to make the device come on. The easy fix would be to use a sensor that responds to a broader range of hand positions. If the concern is that a more-sensitive sensor might cause unintentional activation by people relatively far way, then a device could have two or three less-sensitive sensors spaced out to cover different hand positions. That would raise the machine’s cost a little, but I think reducing customers’ frustration and wasted time would be worth it.

© 2021 Steven Schwartzman